Product ID:ICO-PATCH EPOXY RESIN HARDENER, PART B
MSDS Date:05/08/1992
FSC:8030
NIIN:00N047273
Kit Part:Y
MSDS Number: BTYBN

INTERNATIONAL COATINGS CO

13929 E 166TH
CERRITOS, CA 90701
US

Emergency Phone: 310-926-8332

Info Phone: 310-925-0747

Cage: 0M246

INTERNATIONAL COATINGS

ROSEMONT, IL 60018 US

Telephone: 312-824-6070

Cage: 0M246

POLYAMIDE; (FATTY AMIDOAMINE RESIN)

CAS: 68082-29-1

Fraction By Weight: 50-75%

OSHA PEL N/K

ACGIH TLV: N/K

PIPERAZINE, 1-(2-AMINOETHYL)-; (AMINOETHYLPIPERAZINE)

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K

84854-15-3

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 8%

OSHA PEL N/K

ACGIH TLV: N/K

PHENOL, 4,4'-ISOPROPYLIDENEDI-; (BISPHENOL A) (SARA III)

CAS: 80-05-7

RTECS: SL6300000

Fraction By Weight: 80%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE: NOTICE: MAY CAUSE SKIN OR
EYE IRRIT ON PROLONGED OR REPEATED EXPOSURE. NOT CONSIDERED TOXIC
BY SKIN ABSORPTION. AVOID CONTACT. WEAR PROTECTIVE CLTHG & EYEWEAR.
WASH THORO AFTER HANDLING. INH AL: CAUTION! MAY CAUSE IRRITATION TO
UPPER RESPIRATORY TRACT. AVOID PROLONGED OR REPEATED
INHALATION.(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INGEST: DANGER! DO NOT TAKE
INTERNALLY. MAY CAUSE GASTROINTESTINAL IRRIT OR ULCERATION. MAY
CAUSE BURNS OF MOUTH AND THROAT. OTHER: POLYETHYLENE AMINES ARE
SUSPECTED MUTAGENS. NO EFTS OF CHRO NIC EXPOSURE OR TARGET ORGAN
EFFECTS ARE KNOWN. NO EXPOSURE LIMITS HAVE BEEN ESTABLISHED FOR
THIS PRODUCT AS FORMULATED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN/EYE: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MIN
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. CALL A PHYSICIAN.
INHAL: MOVE TO FRESH AIR. IF SYMPTOMS PERSIST, CONSULT A PHYSICIAN.
INGEST: DO NOT INDUCE VOMITING. GIVE A LARGE QUANTITIY OF MILK OR
WATER. DO NOT GIVE FLUIDS TO AN UNCONSCIOUS PERSON. CALL A
PHYSICIAN.

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOTE: MAY PRODUCE HAZARDOUS FUMES OR
HAZARDOUS DECOMPOSITION PRODUCTS.

Spill Release Procedures:USING RECOMMENDED PROTECTIVE EQUIPMENT, ADD
DRY MATERIAL TO ABSORB SPILL (IF LARGE SPILL, FIRST DIKE TO
CONTAIN). PICK UP AND CONTAINERIZE. FLUSH AREA WITH DILUTE (5%)
ACETIC ACID. COLLECT RINSATE FOR SEWER OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT HANDLE OR USE PRODUCT, UNTIL
SAFETY PRECAUTIONS RECOMMENDED IN THIS DATA SHEET HAVE BEEN READ
AND FULLY UNDERSTOOD.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE (N/A WITH LOCAL EXHAUST).
Ventilation:LOCAL VENTILATION.
Protective Gloves:RUBBER OR PLASTICS GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:PERSONAL PROTECTIVE EQUIPMENT RECOMMENDED
FOR NORMAL USE CONDITIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Vapor Density:7.9
Spec Gravity:0.98 @ 77F
Appearance and Odor:CLEAR, AMBER VISCOUS LIQUID, AMINE/AMMONIA ODOR.
Percent Volatiles by Volume:0@70F

Stability Indicator/Materials to Avoid:YES
AVOID BRINGING IN CONTACT WITH STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:THIS PRODUCT, IF DISPOSED AS SHIPPED, IS NOT A
HAZARDOUS WASTE AS SPECIFIED IN 40 CFR 261. CONSULT STATE, LOCAL &
FEDERAL OFFICIALS FOR PROPER DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.